31Change the 'core' to become Lei Yu

31度换“芯”成雷宇

机缘巧合之下看到了雷宇科教主板漂流活动，让我想起把封印4年的31度切割机来个换“芯”试试。

一、看看我的机器

1.我的机器

Model:31度

softwareAutoLaser

2.The advantages of using the Leiyu series laser cutting machine

（1）Multiple safety protection designs ensure the safe use of laser cutting machines;

（2）Expert in Drawing - Modeling SoftwareLaserMaker, more suitable for beginners to use;

（3）Rich laser course system, easy to teach;

（4）Laser community with abundant resources.

3.Why do you need to replace the "chip" of my Liaocheng machine?

（1）FromLaserMakerGetting started, deeply experiencingLaserMaker简单好用，适合新手，适合学生

（2）You can directly use Lei Yu's rich curriculum system, as well aslaserblockAbundant resources in the community.

2、 The process of replacing the "core"

1.Confirm the board model

拆开激光切割机侧盖, 并完成每个线的标注。

2.The accessories sent by Lei Yu

雷宇激光切割机发来的是定制版的睿达板卡（RDC6442G-LY-B(EC)），

我的激光切割机采用的是TL-410C板卡，线路差别不大，所以换“芯”将变得非常简单，

只需要更换板卡、更换操作面板，使用加密狗即可。

3.Read parameters

openAutoLaser，文件，厂家设置（联系厂家要密码），厂家参数，

选择电机、激光、其他参数，单击读参数，截图保存，否则，参数错误。

file:///C:/Users/ADMINI~1/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg

4.Replace the control panel

（1）Power off! Remove the side cover;

（2）Pull out the connection cable of the control panel;

（3）Remove the old control panel, the side of the control panel has3A buckle can be used to pry off the control panel with the help of a screwdriver;

（4）将拆下的螺丝与卡扣，卡在新的控制面板侧面的孔上，安装控制面板，并拧紧螺丝。

5.Replace the board card

（1）Mark the wiring terminals with labels where there are connections;

（2）Unplug the wiring terminals and other connecting wires on the board;

（3）Use an Allen wrench to remove the four screws that secure the board;

（4）Fix Lei Yu's board onto the laser cutting machine, exceptAXIS XandAXISY(Two wiring terminals in the bottom right corner) Insert the other wiring terminals and connecting wires into the corresponding positions of the board in sequence.

6.debug

（1）Connect the air compressor (air pump) and water pump, connect the power supply, turn on the machine, and turn on the powerLaserMaker, file, manufacturer parameters (password:TL9501）Read the parameters of the motor, laser, and machine in sequence, then modify them according to the parameters read in the previous screenshot and save them to a new board;

（2）On the boardAXIS XandAXISY两个位置插入相应的接线端子，开机测试。

7.Processing testing

After the positioning, reset, and shooting tests are all normal, cut the object for simple processing testing.

切个正方形调整设置精度，这里感谢雷宇老师的耐心帮助。