the 3rd LaserMaker Laser Creation Competition - Design Drawing Specification for Landmark Night Lights ...

1、 Template

1.You can choose one of the templates ①②③ for creation, or make size modifications based on this, ensuring that the basic framework of the night light remains unchanged.

2.Please complete the creation within the range of the pink box. For example, please refer to the image gallery in the upper right corner-2.Exciting creativity-3.Works in the cultural and creative night light.

2、 Layer

1.Layer inLaserMakerIn the lower right part of the drawing interface, please pay attention to the layer order. Any cut layers must be placed last, with carving and drawing lines before cutting.

2.Different depths of carving, drawing lines, and cutting must be represented by different color layers.

3.LaserMakerThe default layer colors are located in the bottom left corner of the drawing interface (indicated by the red box in the bottom left corner of the image below). Black ① defaults to using cutting techniques, red ② defaults to using tracing techniques, yellow ③ defaults to using light carving techniques, and blue ④ defaults to using deep carving techniques; Please do not modify the default color corresponding to the process.

4.If you have designed a color layer other than the default four color layers, double-click the layer and select the desired process in the "Process" column on the right side of the pop-up window (marked by the red box ② in the figure below). After selecting, click "OK" (marked by the red circle ③ in the figure below).

3、 Materials

1.Participants with laser cutting equipment can process their own works and assemble them into final works, with no restrictions on materials.

2.This competition is provided for participants who require outsourcing processing3mmLimestone board and3mmProcessing material for transparent acrylic.

3.When uploading drawings, it is necessary to indicate which part of the night light uses which thickness and material. Same drawing（.lcpx）The patterns in are made of the same material with the same thickness, such as:3mmLimestone board; If two or more materials are required (including different types and thicknesses of the same type), they should be stored separately on different drawings（.lcpx）In the middle. As shown in the figure:

4、 Size

1.Participants with laser cutting equipment can process their own works and assemble them into the final product, with no size limit.

2.The dimensions of the drawings that need to be processed on behalf of others must be within400mm×400mmWithin. (Note: Each work can only be processed once!)

3.Suggest that the width of the thinnest part of the component or pattern be greater than or equal to3mmOtherwise, it is easy to break.

5、 Working hours (requirements for outsourced works)

1.Working hours shall not exceed10minute. The calculation method for working hours is as follows: a. Find the blue circular "Start" button in the bottom right corner of the drawing interface (marked by the red box ① in the figure below), and click the "Start" button.

b. After clicking the "Start" button, a small window appears. Find the blue rectangle on the upper right side of the window and press "Calculate" (marked by the red box ② in the figure below). Click the "Calculate" button.

c. After clicking the "Calculate" button, find the "Time" column directly below the "Calculate" button (marked by the red box in Figure 3), and confirm that the time does not exceed10minute.

6、 Typesetting

1.The layout of the drawings should be neat and compact. The layout method is as follows: a. Find the automatic typesetting tool on the left toolbar of the drawing interface (circled in red in the figure below), and click on the automatic typesetting tool.

b. After clicking, a small window will appear. Modify the pattern spacing (marked as ① in the red box in the figure below). Once the modification is complete, click the "Confirm" button (marked as ② in the red box in the figure below).

7、 Shuikou

1.After laser cutting is completed, small parts are prone to falling off and the order of the parts may be disrupted. Suggest adding a water nozzle before processing, with the nozzle size set to0.3mmSuggest setting up small parts3A water outlet can be added appropriately for larger parts. The method of adding water inlet is as follows: a. Click on the water outlet tool on the left toolbar (circled in red in the figure below).

b. Pop up a preview interface. Modify the parameters on the left side of the interface (marked by the red box ① in the figure below), and click the "OK" button after modification (marked by the red box ② in the figure below).

8、 Other

1.Outsourced processing only provides the parts that have been carved, drawn, and cut. Please complete the coloring and assembly on your own after receiving them.

Reminder again:

🚀 ️ This competition provides services for OEM works3mmLimestone board and3mmTransparent acrylic, the drawing size needs to be within400mm×400mmWithin.

🚀 ️ For the fairness and impartiality of the event, the outsourcing service is limited to one time only, and secondary outsourcing is not allowed. Participants are requested to confirm the drawings before submitting.