Laser cutting drawings | felt document pouch

LaserMakerCase: Felt file bag

In the previous session, Laser Master collaborated with everyone to create a cute and adorable Pikachu car shaking ornament. Today, Laser Master will continue to share with you《LaserMakerLaser Creation Beginner Course ":" Felt File Bag " The production method.

A file bag refers to a document bag or white file used for storing personal belongings or identity documents. The styles are divided into buckle style and file set style, with various materials includingPPMaterialPVCMaterial, kraft paper, Oxford cloth. Today, the laser expert will lead everyone to learn how to use felt fabric to make file bags. In this issue, Laser Expert brings you the work "Felt File Bag"!

work analysis

To complete the production of the felt file bag, it is necessary to first cut and carve the fabric, and then use tools such as needles and thread for sewing.

Bill of Materials

Laser modeling

1.File bag style design

（1）Click on the 'Rectangle' tool from the 'Drawing toolbar' on the left, and drag it on the canvas to draw320×220The rectangle is shown in the following figure:

（2）Select the rectangle,ctrl+cCopy a rectangle and thenctrl+vPaste rectangles and connect the ends of two rectangles; Select the pattern, use the "Drawing Toolbar" on the left, click the "Break Line Segment" tool in the "Eraser", andA、BBreak and delete the line segment, as shown in the following figure:

（3）Click on the tool in the "Line" section of the "Drawing Toolbar" on the left to draw3mmStraight line; Select the line, use the Array tool, and set the number of vertical lines in the Vertical Array to“75”The vertical spacing is“3”Create a dashed line on the left side and move it to the left side inside the rectangle; Use the same method to create the dashed line on the right, as shown in the following figure:

（4）Click on the 'Grid' tool below the canvas and use the 'Line Segment' tool to draw the lid of the file bag; Select the lid and use the 'Rounded Corner' tool to set the parameters to“10mm”Guide it to a rounded corner; Use the Ellipse tool to draw a diameter of“3mm”The circle is placed directly under the lid, as shown in the following figure:

Tips：The production of a perfect circle is for binding five claw buckles.

（5）Click on 'File' in the upper 'Function Area', then click on 'Open', double-click to open a favorite image, as shown in the following figure:

（6）Double click the image with the left mouse button, click on [Image Operation], and set the appropriate parameters, as shown in the following figure:

（7）Click on the "Font" tool from the "Drawing toolbar" on the left, and enter "Create Different Value for Customers" and“LaserMaker”Set the font and font size to "Kai" and "Chu Hao" respectively; Will“LaserMaker”Set as' diagonal line '; Using the 'Line Segment' tool, in“LaserMaker”Draw a straight line on both sides, as shown in the following figure:

2.Laser processing

（1）Select 'dashed line and two straight lines on the right', left click on the layer panel in the lower left corner to change the layer to red; Select "Image" and font, left click on the layer panel in the lower left corner to change the layer to yellow; Select 'Outline and Circle of File Bag', left click on the layer panel in the lower left corner to change the layer to black, as shown in the following figure:

（2）Double click the red layer in the bottom right corner of the 'Processing Panel' with the mouse to add the custom material 'Felt'. Double click 'Custom' to set English, Simplified Chinese, and Traditional Chinese asfeltFelt, felt3mmDouble click the blank icon and select the felt material image; Set the material, thickness, and process to felt3mmDraw a line as shown in the following figure:

（3）Double click the yellow layer on the processing panel in the bottom right corner with the mouse, and set the material, thickness, and process to felt3mmShallow carving; Double click the black layer on the processing panel in the bottom right corner with the mouse, and set the material, thickness, and process to felt3mmCutting; Adjust the positions of several layers in the order of "line drawing, light carving, and cutting", as shown in the following figure:

3.Sewing processing

First, use needle and thread to sew the left and right sides of the file bag along the dotted line, and then use hand pliers to bind the five claw buckle to the circular position on the file bag.

Works Display

summary

In the production process of this instance, we ultimately need to sew the file bag. So in the process of designing drawings, we need to think about how to process them to make sewing more convenient and easy? Therefore, laser experts use arrays to create dotted lines for sewing file bags, and also create regular circles for binding five claw buckles. Drawing and modeling are not difficult, everyone must try and practice more to become a better little designer!

Tourists, if you want to view the hidden content of this post, pleasereply

LaserMakerLaser modeling softwaredownload

shiyongsheji

Very good design

Thank you for sharing, OP

111111111111