Laser cutting design diagram | Internet celebrity bamboo tube

LaserMakerCase: Internet celebrity bamboo tube

In the previous class, we successfully analyzed the work and achieved laser modelingDIYA bottle opener and learningLaserMakerHow to use the 'Rotate' and 'Horizontal/Vertical Mirror' drawing tools in. Today, Laser Expert will continue to share with you《LaserMakerIntroduction to Laser Creation Course: Methods for Making Internet Famous Bamboo Tubes.

Analyze the work

Using a ruler to measure, the diameter of the bamboo tube is80mmHigh for90mmThe thickness is8mmAccording to the formula for the circumference of a circledThe processable range of bamboo tubes is a length of251.2mmThe width is90mmThe rectangle. So we cannot exceed this processing range when drawing design drawings.

Bill of Materials

1. Draw graphic elements

（1）Click on 'File' in the upper 'Function Area', then click on 'Open', double-click to open the image that needs to be carved, as shown in the following figure:

（2）Select the image "Guangzhou", left click on "Contour Extraction" in the graphic, and delete the image and excess graphics to leave only the contour, as shown in the following figure:

（3）Click on the 'Font' tool from the 'Drawing toolbar' on the left, enter 'Guangzhou', set the font and size to 'Chinese Kai font' and 'Initial font size' respectively, click and select 'Bold' with the mouse, and drag the font to move directly above the graphic, as shown in the following figure:

2. Laser processing

（1）Select the font and left click on the yellow layer in the lower left corner of the 'Layer Color Palette' to set the 'Font' to the yellow layer, as shown in the following figure:

（2）Double click the yellow layer on the processing panel in the bottom right corner with the mouse, and set the material, thickness, and process to oak board8mmShallow carving; Set the black layer material, thickness, and process to oak board, respectively8mmDraw a line as shown in the following figure:

（3）Click on 'File' in the upper 'Function Area', then click on 'Options', select' Rotation Axis' on the page, click on 'Enable Rotation Axis', and change' Diameter 'to80mmAs shown in the following figure:

（4）Click on "Start" in the bottom right corner of the "Processing Panel" to upload files to the device, as shown in the following figure:

Introduction and usage of rotation axis

Introduction to Rotation Axis

The bamboo tubes processed in this issue are circular objects, and normal processing methods cannot process circular objects properly because standard laser machines can only process on a flat surface, and the size of the laser spot will vary greatly with the curvature of the circular object, resulting in significant differences in processing effects in different places.

As shown in the above figure, we can see thatAThe spot of light is very fine, andBThe spot of light is very coarse. fromAClick to move toBDuring the process of pointing, the light spot continuously thickens, resulting in significant changes in the processing effect and preventing normal processing.

The rotating shaft can precisely solve this problem. The working principle of the rotating shaft is to clamp a circular object on the rotating shaft and cancel it at the same timeYThe movement function of the axis directly drives a circular object to rotate by rotating the axis, making the object itself a plane (relative toXAxis).

How to use the rotating shaft

1.Twist the selected hole in the frame and clamp the bamboo tube onto the rotating shaft, as shown in the following figure

2.Connect the power cord of the rotating shaft to the right side of the deviceYIn the groove of the axis track, as shown in the following figure:

3.Click on the control panelZThe directional keys of the axis control the descent of the processing platform. Move the laser head above the bamboo tube and use a focusing ruler to focus, as shown in the following figure:

Works Display

summary

Looking back at the process of creating this example, we have learnedLaserMakerThe usage method of the software's contour extraction drawing tool and the use of the rotation axis have been learned. Drawing and modeling are not difficult, so everyone must try and practice more!

Tourists, if you want to view the hidden content of this post, pleasereply

LaserMakerLaser modeling softwaredownload

Ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah ah

Good looking, please share!

BKJYFYCUYJGUBKNKLNO;

Good looking, good looking, good looking, good looking, good looking, good looking, good looking

The laser cutting design is really amazing!

111111111111111

6666666666